Synthesis and adsorption properties of pyrazosulfuronethyl molecularly imprinted polymers

YU RuiLong1;DU HuaYing1,2;ZHOU ZhiE1,2;TANG KaiJie1,2

Journal of Beijing University of Chemical Technology ›› 2014, Vol. 41 ›› Issue (1) : 46-51.

PDF(3130 KB)
Welcome to Journal of Beijing University of Chemical Technology, Today is July 27, 2025
Email Alert  RSS
PDF(3130 KB)
Journal of Beijing University of Chemical Technology ›› 2014, Vol. 41 ›› Issue (1) : 46-51.
化学与化学工程

Synthesis and adsorption properties of pyrazosulfuronethyl molecularly imprinted polymers

  • YU RuiLong1;DU HuaYing1,2;ZHOU ZhiE1,2;TANG KaiJie1,2
Author information +
History +

Abstract

Pyrazosulfuron-ethyl molecularly imprinted polymers (PS-MIPs) have been synthesized by the molecular imprinting technique using pyrazosulfuron-ethyl (PS) as the template molecule, methacrylic acid (MAA) as the functional monomer, azobisisobutyronitrile (AIBN) as the initiator and trimethylolpropane trimethacrylate (TRIM) as the cross-linking agent. Three different porogens were used to synthesise PS-MIPs, and the effect of porogen volume on the adsorption capacities and the particle size of the MIPs were evaluated. The results showed that the MIPs that utilised dichloromethane as the porogen exhibited higher binding capacities than those prepared with n-hexane or n-hexane: dichloromethane (volume ratio 11). The porogen volume had little effect on the adsorption capacities, but it clearly affected the particle size. The largest particle size was obtained for MIP3 (D50=5.36μm) when 36mL of dichloromethane was used as the porogen and the materials also had a high adsorption capacity of 3321.29μg/g. The polymers were studied by scanning electron microscopy and infrared spectroscopy and the imprinting sites in MIP could be clearly observed. The PS-MIPs synthesized by the above method showed high selectivity for PS in selective adsorption experiments. The adsorption capacity of PS-MIPs for PS, bensulfuron-methyl (BSM), tribenuron-methyl (TBM), metsulfuron-methyl (MSM) and nicosulfuron (NS) were 1146.19, 1044.21, 1087.27, 1051.92 and 1023.89μg/g, respectively.

Cite this article

Download Citations
YU RuiLong1;DU HuaYing1,2;ZHOU ZhiE1,2;TANG KaiJie1,2. Synthesis and adsorption properties of pyrazosulfuronethyl molecularly imprinted polymers[J]. Journal of Beijing University of Chemical Technology, 2014, 41(1): 46-51

References

[1]Cormack P A G, Elorza A Z. Molecularly imprinted polymers: synthesis and characterization[J]. Journal of Chromatography B, 2004, 804: 173-182.
[2]Vlatakis G, Andersson L I, Muller R,et al. Drug assay using antibody mimics made by molecular imprinting[J]. Nature, 1993, 361: 645-647.
[3]Hu Y L, Pan J L, Zhang K G, et al. Novel applications of molecularly imprinted polymers in sample preparation[J]. TrAC Trends in Analytical Chemistry, 2013, 43: 37-52.
[4]Tamayo F G, Titirici M M, Martin-Esteban A, et al. Synthesis and evaluation of new propazine-imprinted polymer formats for use as stationary phases in liquid chromatography [J]. Analytica Chimica Acta, 2005, 542(1):38-46.
[5]Nunez L, Turiel E, Esteban M A, et al. Molecularly imprinted polymer for the extraction of parabens from environmental solid samples prior to their determination by high performance liquid chromatography-ultraviolet detection[J]. Talanta, 2010, 80(5): 1782-1788.
[6]Carolina Q M, Bérengère C, Ana M G C, et al. Convenient solid phase extraction of cephalosporins in milk using a molecularly imprinted polymer [J]. Food Chemistry, 2012, 135(2): 775-779.
[7]Alizadeh T, Ganjali M R, Zare M, et al. Selective determination of chloramphenicol at trace level in milk samples by the electrode modified with molecularly imprinted polymer [J]. Food Chemistry, 2012, 130(4): 1108-1114.
[8]Krishnamoorthy B, Kannan G, Tangirala P. Preparation and evaluation of molecularly imprinted polymer liquid chromatography column for the separation of cathine enantiomers [J]. Saudi Pharmaceutical Journal, 2012, 20(1): 53-61.[9]Yoon S D, Byun H S. Molecularly imprinted polymers for selective separation of acetaminophen and aspirin by using supercritical fluid technology [J]. Chemical Engineering Journal, 2013, 226(15): 171-180.
[10]Ali A, Mohammad R M H, Mostafa N. A novel capacitive biosensor for cholesterol assay that uses an electropolymerized molecularly imprinted polymer [J]. Electrochimica Acta, 2010, 55(5): 1503-1508.
[11]Chen P Y, Vittal R, Nien P C, et al. A novel molecularly imprinted polymer thin film as biosensor for uric acid [J]. Talanta, 2010, 80(3): 1145-1151.
[12]Saioa Z, Brian B, Stig J, et al. Selective determination of acidic pharmaceuticals in waste water using molecularly imprinted solid phase extraction [J]. Analytica Chimica Acta, 2008, 626(2): 147-154.
[13]Dai C M, Zhang J, Zhang Y L, et al. Selective removal of acidic pharmaceuticals from contaminated lake water using multi-templates molecularly imprinted polymer [J]. Chemical Engineering Journal, 2012, 211/212(15): 302-309.
[14]Ding F, Liu W, Zhang X, et al. Identification of pyrazosulfuron-ethyl binding affinity and binding site subdomain IIA in human serum albumin by spectroscopic methods [J]. Spectrochimica Acta Part A, 2010, 75(3): 1088-1094.
[15]Dasgupta S, Meisner C, Wheeler D, et al. Pesticide poisoning of farm workers-implications of blood test results from vietnam [J]. Journal of Hygiene and Environmental Health, 2007, 210(2): 121-132.
[16]Yang M X, Zhang Y Y, Lin S, et al. Preparation of a bifunctional pyrazosulfuron-ethyl imprinted polymer with hydrophilic external layers by reversible addition-fragmentation chain transfer polymerization and its application in the sulfonylurea residue analysis [J]. Talanta, 2013, 114: 143-151.
[17]汤凯洁,顾小红,朱松, 等. 苄磺隆印迹聚合物的波谱分析及吸附性能研究[J]. 化学学报, 2009,67(7): 687-692.
Tang K J, Gu X H, Zhu S, et al. Spectrum analysis and adsorption characteristics of bensulfuronmethyl molecularly imprinted polymers[J]. Acta Chimica Sinica, 2009, 67(7): 687-692. (in Chinese)
[18]Tang K J, Chen S W, Gu X H, et al. Preparation of molecularly imprinted solid phase extraction using bensulfuron-methyl imprinted polymer and clean-up for the sulfonylureaherbicides in soybean [J]. Analytica Chimica Acta, 2008,614:112-18.
[19]杜自卫, 刘学涌, 赵小东. TNT分子印迹聚合物微球的合成与性能研究[J]. 高分子学报, 2010(3):360-365.
Du Z W, Liu X Y, Zhao X D. Preparation and properties of TNT imprinted polymer microspheres [J]. Acta Polymerica Sinica, 2010(3): 360-365. (in Chinese)
[20]杨卫海, 严守雷, 卫晨, 等. 沉淀聚合法制备三聚氰胺分子印迹聚合物微球 [J]. 高分子学报, 2010(10):1163-1169.
Yang W H, Yan S L, Wei C, et al. Preparation of melamine molecularly imprinted polymer microspheres by precipitation polymerization [J]. Acta Polymerica Sinica, 2010(10): 1163-1169. (in Chinese)
PDF(3130 KB)

1678

Accesses

0

Citation

Detail

Sections
Recommended

/