Application of dimensional analysis in determining the screening efficiency of a particle impact drilling separation system

WANG YiXiao1;ZHANG Yang1;WEN LinRong2;YAN TingJun1

Journal of Beijing University of Chemical Technology ›› 2011, Vol. 38 ›› Issue (3) : 113-117.

PDF(962 KB)
Welcome to Journal of Beijing University of Chemical Technology, Today is April 9, 2025
Email Alert  RSS
PDF(962 KB)
Journal of Beijing University of Chemical Technology ›› 2011, Vol. 38 ›› Issue (3) : 113-117.
机电工程和信息科学

Application of dimensional analysis in determining the screening efficiency of a particle impact drilling separation system

  • WANG YiXiao1;ZHANG Yang1;WEN LinRong2;YAN TingJun1
Author information +
History +

Abstract

Experimental data from a separation system involving particle impact drilling has been analysed using dimensional theory. It was found that the extent of loss of steel particles increased with increasing flux and viscosity of the drilling fluid and steel particle ratio. In the dimensional model, the geometric features, working state of the apparatus and parameters of the drilling fluid were found to be the decisive factors. Furthermore, an empirical formula has been proposed to describe this relationship.

Cite this article

Download Citations
WANG YiXiao1;ZHANG Yang1;WEN LinRong2;YAN TingJun1
.
Application of dimensional analysis in determining the screening efficiency of a particle impact drilling separation system[J]. Journal of Beijing University of Chemical Technology, 2011, 38(3): 113-117

References

[1]Curlet H B, Sharp D P, Gregory A. Formation cutting method and system: US, 6581700B2[P]. 2003-06-24. 
[2]朱光有, 张水昌. 中国深层油气成藏条件与勘探潜力[J]. 石油学报, 2009, 30(6): 793-802.
Zhu G Y, Zhang S C. Hydrocarbon accumulation conditions and exploration potential of deep reservoirs in China [J]. Acta Petrolei Sinica, 2009, 30(6): 793-802. (in Chinese)[3]陈熹璆, 张杨, 温荣林. 粒子冲击钻井系统研究初探[J]. 石油机械, 2010, 38(5): 8-10. 
Chen X Q, Zhang Y, Wen R L. A preliminary exploration of the particle impact drilling system[J]. China Petroleum Machinery, 2010, 38(5): 8-10. (in Chinese)
[4]谈庆明. 量纲分析[M]. 合肥: 中国科学技术大学出版社, 2005. 
Tan Q M. Dimensional Analysis[M]. Hefei: University of Science and Technology of China Press, 2005. (in Chinese)
[5]易先中, 王利成, 魏慧明, 等. 钻井岩屑粒径分布规律的研究[J]. 石油机械, 2007, 35(12): 1-4. 
Yi X Z, Wang L C, Wei H M, et al. Research of drilling cuttings size distribution regularity[J]. China Petroleum Machinery, 2007, 35(12): 1-4. (in Chinese)
[6]姜玲, 王小兵. 用量纲分析法求解柱塞下行阻力[J]. 复杂油气藏, 2008, 1(1): 66-68. 
Jiang L, Wang X B. Utilize dimensional analysis to solve downgoing resistance of plunge [J]. Complex Hydrocarbon Reservoirs, 2008, 1(1): 66-68. (in Chinese)
[7]付泽民, 莫健华, 陈伟, 等. 基于量纲分析法的金属板材折弯回弹数学模型[J]. 机械工程学报, 2010, 46(12): 53-58. 
Fu Z M, Mo J H, Chen W, et al. Springback Model for Air-bending of Sheet Metal Based on Dimensional Analysis Method [J]. Journal of Mechanical Engineering, 2010, 46(12): 53-58. (in Chinese)
[8]施里宇, 李天太, 张喜凤, 等. 温度和膨润土含量对水基钻井液流变性的影响[J]. 石油钻探技术, 2008, 36(1): 20-22. 
Shi L Y, Li T T, Zhang X F, et al. Effects of temperature and clay content on water-based drilling fluids’ rheological Property [J]. Petroleum Drilling Techniques, 2008, 36(1): 20-22. (in Chinese)
[9]奇林格雷G V, 沃布切P. 钻井和钻井液[M]. 徐云英, 张绍槐, 孙维林, 等, 译. 北京: 石油工业出版社, 1987. 
Chilingarian G V, Vorabutr P. Drilling and drilling fluids[M]. Xu Y Y, Zhang S H, Sun W L, et al, trans. Beijing: Petroleum Industry Press, 1987. (in Chinese)
[10]布兰特 L K, 洛夫 B. 泥浆振动筛[M]. 李祖圣, 译. 北京: 石油工业出版社, 1987. 
Brandt L K, Love B. Shale shake [M]. Li Z S, trans. Beijing: Petroleum Industry Press, 1987. (in Chinese)
PDF(962 KB)

2457

Accesses

0

Citation

Detail

Sections
Recommended

/