中空纤维膜组件结构对其膜蒸馏性能的影响

郝高峰;丁忠伟;*刘丽英;马润宇;杨祖荣

北京化工大学学报(自然科学版) ›› 2009, Vol. 36 ›› Issue (5) : 9-12.

PDF(924 KB)
欢迎访问北京化工大学学报(自然科学版),今天是 2025年7月11日 星期五
Email Alert  RSS
PDF(924 KB)
北京化工大学学报(自然科学版) ›› 2009, Vol. 36 ›› Issue (5) : 9-12.
化学与化学工程

中空纤维膜组件结构对其膜蒸馏性能的影响

  • 郝高峰;丁忠伟;*刘丽英;马润宇;杨祖荣
作者信息 +

The effect of configuration on the performance of a hollow fiber membrane module

  • HAO GaoFeng;DING ZhongWei;LIU LiYing;MA RunYu;YANG ZuRong
Author information +
文章历史 +

摘要

对一系列不同封装分率和不同膜面积的中空纤维膜组件进行了直接接触式膜蒸馏对比实验,并考察了操作方式对跨膜通量的影响。结果表明:提高封装分率可以明显降低沟流效应,使壳程流体分布趋于均匀,总体传质、传热效果得到改善,从而使跨膜通量提高,增幅可达40%以上; 在组件封装分率较低时,热流体走管程更有利于跨膜传质。在进料状况不变的条件下,随着膜面积的增加,组件单位膜面积的跨膜通量明显降低,而总产量则有所增加。

Abstract

Direct contact membrane distillation experiments with a series of hollow fiber membrane modules of different packing density or different membrane area have been conducted, and the effects of the operating mode on the trans-membrane flux were investigated. It was found that the distribution of the flow in the shell side became more uniform with increasing packing density, so that the channeling effect was weakened, the trans-membrane flux was enhanced and the flux enhancement was more than 40%. For lower packing densities, flow of hot feed through the tube side was more beneficial to mass transfer. With increasing membrane area, the productivity of the module increased to some extent whilst the trans-membrane flux became significantly lower.

引用本文

导出引用
郝高峰;丁忠伟;*刘丽英;马润宇;杨祖荣. 中空纤维膜组件结构对其膜蒸馏性能的影响[J]. 北京化工大学学报(自然科学版), 2009, 36(5): 9-12
HAO GaoFeng;DING ZhongWei;LIU LiYing;MA RunYu;YANG ZuRong. The effect of configuration on the performance of a hollow fiber membrane module[J]. Journal of Beijing University of Chemical Technology, 2009, 36(5): 9-12

参考文献

[1]Wu J, Chen V. Shell-side mass transfer performance of randomly packed hollow fiber modules[J]. Journal of Membrance Science, 2000, 172(1/2): 59-74.
[2]阎建民, 袁其朋, 马润宇. 用缠绕式摹组件强化传递过程的研究[J].
膜科学与技术, 2001, 21(4): 13-16. Yan J M, Yuan Q P, Ma R Y. Transfer enhancement of membrane process with helical wound modules[J]. Membrane Science and Technology,2001, 21(4): 13-16. (in Chinese)
[3]丁忠伟. 膜蒸馏的膜组件性能及动态过程研究[D]. 北京:北京化工大
学化学工程学院,2001.
Ding Z W. Study on the Module Performance and Dynamic Process of Membrane Distil
lation[D]. Beijing: College of Chemical Engineering, Beijing University of Chemical Technology, 2001. (in Chinese)
[4]Gawroński R, Wrzesińska B. Kinetics of solvent extraction in hollow-
fiber contactors[J]. Journal of Membrane Science, 2000, 168(1/2): 213-222.
[5]Zheng J M, Xu Z K, Li J M, et al. Influence of random arra
ngement of hollow fiber membranes on shell side mass transfer performance: A novel model prediction[J]. Journal of Membrane Science, 2004, 236(1/2): 145-151.
[6]Ding Z W, Liu L Y, Ma R Y. Study on the effect of flow maldistributio
n on the performance of the hollow fiber modules used in membrane distillation[J]. Journal of Membrane Science, 2003, 215(1/2): 11-23.
[7]李利君, 刘丽英, 丁忠伟. 装填分率对中空纤维膜组件壳程传质性能的
影响[J]. 北京化工大学学报: 自然科学版, 2005, 32(3): 1-4.
Li L J, Liu L Y, Ding Z W. The effect of packing density on shell-side mass tra
nsfer performance of hollow fiber membrane module[J]. Journal of Beijing University of Chemical Technology: Natural Science, 2005, 32(3): 1-4.(in Chinese)
[8]Wang Y J, Chen F, Wang Y, et al. Effect of random packing on shell-s
ide flow and mass transfer in hollow fiber module described by normal distribtion function[J]. Journal of Membrane Science,2003, 216(1/2): 81-93.

PDF(924 KB)

2733

Accesses

0

Citation

Detail

段落导航
相关文章

/