
片状无机富锌涂料的制备及其性能
Preparation and properties of inorganic flake zincrich coatings
采用硅酸钾溶液作为成膜物,以硅溶胶和烷氧基硅烷为主要原料,制备出片状无机富锌涂料。结果表明,含40%(质量分数)锌的片状无机富锌涂料的耐盐雾时间超过3000h。该富锌涂料通过了720h划痕实验,阴极保护性能非常好。该涂料与环氧云铁中间漆复合后,在3.5%NaCl溶液中浸泡15?d的涂层阻抗值仍然处于10.9Ω/cm2以上,并且lg|Z|~lgf曲线的斜率一直保持-1左右。
Inorganic flake zincrich coatings have been prepared using potassium silicate as a film forming material and silica sol and alkoxysilanes as the main raw materials. A coating which contained 40% mass percent of zinc was shown to afford good cathodic protection and an excellent anticorrosion performance in salt spray testing. Furthermore, the adaptability of epoxy middle paste and inorganic flake zincrich coatings was satisfactory.
/
〈 |
|
〉 |